There are 24 results.
Austrian research, technology and innovation (RTI) competences in the domain of „Physical Internet and transport logistics“
This brief study is intented to give an overview of national RTI competences in Austria and the respective stakeholders.
Dr. Andrea Kasztler, Mag. Petra Wagner, Dr. Beatrix Wepner (AIT)
Publisher: Federal Ministry of Transport, Innovation and Technology
English, 35 pages
Programme 'Mobility of the Future' - RTI Agenda and Roadmap for Personal Mobility (English Summary) 2018
The Research, Technology and Innovation (RTI) Agenda refines the theme-specific programme mission of Personal Mobility in the RTI-funding programme “Mobility of the future” and points out areas of research addressed as well as programme actions until the year 2020 (Roadmap)”
Walter Wasner (BMVIT); Julian Pöll, Silvo Korez, Nora Spiegel, Michaela Enzenhofer (AustriaTech); Dietrich Leihs (FFG)
English, 21 pages
Shear area model - Mechanically consistent shear area-model for existing bridges without or with small lateral force reinforcement
Within the scope of this research project a mechanically consistent model for the shear resistance of bridges without or low shear reinforcement was developed.
Dipl.-Ing. Patrick Huber, Univ.-Prof. Dr.Ing. Johann Kollegger, Univ.-Prof. Dr.Ing. Viet Tue Nguyen, Dr.-Ing. Duc Tung Nguyen
German, 251 pages
The proposed study analysed the impact of Industry 4.0 on the transport and logistics sector, also with regard to the foreign trade links of the Austrian economy. This analysis therefore offers a sound basis for the formulation of differentiated economic and transport policy recommendations as well as strategic recommendations.
Mag. Wolfgang Lueghammer, Mag.(FH) Wilhelm Schachinger, Mag. Dr. Wolfgang Schwarzbauer, et al.
German, 117 pages
AIDA-F - Potential of interdisciplinary approaches for organizational innovations in freight transport
An awareness of the value and benefit of taking an interdisciplinary approach to the treatment of challenges facing the Mobility of Goods has only developed to a certain extent, which is why interdisciplinary results are still hard to come by. External stimuli are usually required to open up introverted specialist debates on the phenomena that occur, to motivate a collaborative accomplishment of tasks and as such to mobilise innovation processes.
Dipl.-Ing. Dr. rer. nat. Heinz DÖRR; Viktoria MARSCH, Bakk.techn.; Dipl.-Ing. (FH) Andreas ROMSTORFER; MA Yvonne TOIFL, BSc
German, 157 pages
Combined transport (CT) is an environmentally sensible and politically desired traffic, which is struggling with cost problems due to complicated supply chains. Previous innovations in CT have focused much on the development of new transhipment technologies. These innovations were very expensive and resulted in the medium term partly to a further increase in the cost of the supply chain. The intention of this study includes a redesign of the transport and business processes, the compatibility of interfaces (with orientation towards homogenization and standardization) for the individual actors and an adapted technological development of intermodal transport containers (containers, SAL, WAB).
DI Alexander Chloupek (ABC Consulting)
German, 50 pages
The objective of this project was the elaboration of the handling instruction for the adaptation of conventional existing bridges to integral bridges by means of a survey of the national and international literature as well as statistical examination taking essential parameters into account. In addition to the essential construction details of the integral or semi-integral bridges (e.g., frame corner and concrete hinge) the deformable slip plate will also be examined and design rules will be suggested.
O. Univ.-Prof. Dr.-Ing. habil. Nguyen Viet Tue, Dipl.-Ing. Regina della Pietra, Dipl.-Ing. Stefan Oberwalder et al.
German, 332 pages
The study ecomTraf analysed the impacts of the relation between consumer needs, the offers of online retailers and the CEP (courier-express-parcel) service industry on the development of the overall transport system.
Mag.(FH) Doris Gierlinger, Dr. Marike Kellermayr-Scheucher, Dr. Oliver Koll, Dr. Maria Kreuzer, Dr. Max Herry, DI Norbert Sedlacek
German, 67 pages
The MobLab Study supports the exploration of emerging urban mobility laboratories in Austria, in order to reduce the gap between the research results of the rigid environment of a laboratory and the implementation practice by offering a targeted accompanying of new Living Labs as user centred innovation settings as well as an evaluation of the gained insights.
Martin Berger, Linda Dörrzapf, Gert Breitfuß, Michael Poglitsch, Andrea Stickler, Vanessa Sodl, Elias Remele
German, 53 pages
RAKO-Donaukanal analyses how urban freight transport can be organized in a sustainable way by using a combination of urban waterways and cargo bikes. A boat is used to transport goods along the Donaukanal into the city centre and cargo bikes take over the last mile distribution.
Mag. Reinhard Jellinek, DI Willy Raimund, Mag. Judith Schübl, DI Christine Zopf-Renner (Österreichische Energieagentur) DI Karl Reiter, Dr. Susanne Wrighton (FGM-AMOR) DI Richard Anzböck Zivilingenieur für Schiffstechnik Florian Weber, Heavy Pedals Lastenradtransport und -verkauf OG
Publisher: Österreichische Energieagentur – Austrian Energy Agency, Mariahilfer Straße 136, A-1150 Wien, T. +43 (1) 586 15 24, Fax DW - 340, firstname.lastname@example.org | www.energyagency.at
German, 103 pages
SynArea – Synergetic area coverage by public transport and low-threshold short trip-private transport
The aim of the project is the coverage of rural and/or suburban regions with multimodal services, which are more attractive for customers and economically more efficient than conventional public transport, accessed by foot, bike&ride or park&ride, and at the same time ecologically and socially more sustainable, than the sole use of motorised individual transport.
Harald Buschbacher, Gerald Kelz, Edith Hartmann, Stefan Kirschbichler, Christian Obermayer
German, 232 pages
FTB-Concrete Surface – Influence of air void characteristics and aftertreatment for frost and de-icing chemical resistance of concrete carriage-ways
This research project analyzed how a noncompliance with requirements or has a negative effect on the freeze-thaw resistance of concrete pavements.
Dipl.-Ing. Dr. Martin Peyerl, Dipl.-Ing. Christian Dillig, Mag.(FH) Dipl.-Ing. Dr. Stefan Krispel
German, 151 pages
The objective of the project was to apply the EU regulations 2009/661/EC (contains new tyre noise limits) and 2009/1222/EC (noise labelling of tyres) to Austrian conditions in order to find the actual feasible noise reduction, as well as suggestions of how to adapt the Austrian calculation basis.
DI Manfred Haider, DI Reinhard Wehr, Dott. Ing. Marco Conter, Ing. Gerhard Strohmayer, DI Heinz Hoislbauer
German, 74 pages
Combined fibre concrete – Development of a crack-free railway sleeper through the use of a combined fiber-reinforced high-strength concrete
In practice the use of pre-stressed concrete sleepers is often accompanied by cracks-occurrence, such as longitudinal, lateral and shrinkage cracks. At the occurrence of cracks the resistance of sleepers to environmental influences is reduced.By the development of a combined fibre reinforced high-strength concrete, the risk of a formation of micro- and macro cracks can be substantially reduced, whereby the expected lifetime of concrete sleepers can increasing significantly and a costly renovation can be avoided.
Dr.- Ing. Sandro Weisheit, Dipl.-Ing. Gregor Metzler
German, 85 pages
The project ODIMAK dealt with a new capacity analysis method for multi-level intersections based on existing guidelines. Measurements of complex weaving procedures on the ASFINAG network were taken into account. A microscopic traffic simulation tool was applied to develop an analysis method for multiple weaving segments. The traffic flow model was calibrated using the previous measurements. Typical geometrical settings were defined and modeled. The simulation results are taken for regression analysis to identify suitable dimensioning procedures, which were discussed within the FSV committee on intersections.
DI Michael Cik, Prof. Dr.-Ing. Martin Fellendorf, DI Roland Fenzl, DI Erich Gaube, DI Dr. techn. Georg Kriebernegg
German, 100 pages
OBESTO – Implementation of the user oriented and Life Cycle Costing approach in the Austrian design method for upper road structures
Within this project, performance-based material behaviour of Hot Mix Asphalt (HMA) was implemented in the Austrian design approach. Considering actual asphalt mechanic behaviour, as well as specific traffic loads and climatic conditions, the structural technical life time of road pavements with different bitumen, bitumen systems and mix design could be determined and considered in the design process. In addition, a standardized life-cycle cost analysis helped to evaluate and identify the economic differences between alternative pavement types. The results of this project should be the basis for a complete revision of the Austrian pavement design standard, RVS 03.08.63.
Univ.-Prof. DI Dr Ronald Blab, DI Lukas Eberhardsteiner, DI Katrin Haselbauer, DI Bettina Marchart, DI Torsten Hessmann
German, 147 pages
Stefan Schönfelder, Mark Sommer, Rahel Falk, Kurt Kratena (WIFO), Romain Molitor, Liette Clees, Benjamin Kigilcim, Helmut Koch, Svenja Lembke, Christian Obermayer, Rainer Schrögenauer (komobile),
Publisher: Österreichisches Institut für Wirtschaftsforschung, 1030 Wien, Arsenal, Objekt 20 • Tel. (+43 1) 798 26 01-0 • Fax (+43 1) 798 93 86 • http://www.wifo.ac.at/ • Verlags- und Herstellungsort: Wien
German, 456 pages
The publication provides an overview on research projects and activities between 2012 and 2016. About 100 projects have been funded and financed by BMVIT amounting 20 Mio. € in total.
DI Walter Wasner
Publisher: Bundesministerium für Verkehr, Innovation und Technologie – BMVIT
English, 128 pages
EFLOG - Potential of the services of new vehicle technologies to impact on the offerings of logistics service providers
The purpose of the study was to link the performance obtained from respective drive technologies, which are in various stages of their technological development up to ready-to-use models, of utility vehicles to the services offered by logistics providers and freight carriers to their customers.
Dipl.-Ing. Dr. rer. nat. Heinz Dörr, Kevin Hillen, MSc Viktoria Marsch, Bakk.techn. Dipl.-Ing. (FH) Andreas Romstorfer, MA Yvonne Toifl, BSc , et al.
German, 252 pages
WIFAS - The Assessment of social impacts of funding programmes that support research in the mobility of people and goods
The aim of the WIFAS study is to develop a conceptually and empirically sound model to capture the social effects and/or impacts caused by subsidy programmes –Thus, by working out appropriated indicators and by conceiving a rating system which is suitable fort he analysis of a variety of impact dimensions, with special emphasis on ecological effects.
Mag. Peter Kaufmann, Laurenz Wolf, MSc, Mag. Alex Schubert, Dr. Alexander Neumann
German, 154 pages